Road Bike Maintenance - How to Maintain Your Bike For Maximum Life
Just as a car needs to be properly maintained to run at its best, road bikes are no exception and need to be well taken care of especially if you intend to ride for a while. If you want to enjoy your bike to its fullest, then road bike maintenance is essential.
One of the most important things to do before a ride is to always perform a quick safety check by ensuring the screws are on tightly, inspecting the frame for damage and checking the tires. This only takes a couple of minutes but each aspect is important so your bike does not break on you.
Be sure that your chain is lubed every 100-200 miles as it easily builds up dirt which may be tough to remove later on. The tires should always be inflated to its proper pressure with absolutely no punctures or holes anywhere.
Cleaning your whole bike is probably the most laborious activity but is essential if you want to prolong the life of your road bike. You will need a road bike, a bucket of soapy water, a brush, degreaser to remove dirt, and oil for the chain and axles.
Start your road bike maintenance by propping your bike onto a stand and proceeding to clean the wheels by applying degreaser to the spokes and hub while removing dirt. Then use more degreaser on the chain, front and rear deailleurs, chain rings, and brakes while using soapy water to scrub hard.
Now that the hard part is done, proceed to clean the entire bike by removing dirt from obvious places such as under the saddle and on the frame. Rinse off the bike with clean water and dry it off with a clean cloth while also thoroughly inspecting for any signs of damage or parts that need to be repaired.
This process of road bike maintenance will probably take longest the first time around but once you get used to it, you will get faster. Maintaining your bike is extremely important as it allows you to identify early on any problems that may occur in the future.
One of the most important things to do before a ride is to always perform a quick safety check by ensuring the screws are on tightly, inspecting the frame for damage and checking the tires. This only takes a couple of minutes but each aspect is important so your bike does not break on you.
Be sure that your chain is lubed every 100-200 miles as it easily builds up dirt which may be tough to remove later on. The tires should always be inflated to its proper pressure with absolutely no punctures or holes anywhere.
Cleaning your whole bike is probably the most laborious activity but is essential if you want to prolong the life of your road bike. You will need a road bike, a bucket of soapy water, a brush, degreaser to remove dirt, and oil for the chain and axles.
Start your road bike maintenance by propping your bike onto a stand and proceeding to clean the wheels by applying degreaser to the spokes and hub while removing dirt. Then use more degreaser on the chain, front and rear deailleurs, chain rings, and brakes while using soapy water to scrub hard.
Now that the hard part is done, proceed to clean the entire bike by removing dirt from obvious places such as under the saddle and on the frame. Rinse off the bike with clean water and dry it off with a clean cloth while also thoroughly inspecting for any signs of damage or parts that need to be repaired.
This process of road bike maintenance will probably take longest the first time around but once you get used to it, you will get faster. Maintaining your bike is extremely important as it allows you to identify early on any problems that may occur in the future.
Comments
Post a Comment